Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' ORANGE ScarfMaster HT

Single and Twin cut-off with weld bead

KINS’ ORANGE ScarfMaster HT saw blade has been engineered for flying cut-off applications dealing with heavy inside scarf (non-orbital cut-off), offering precision and durability. Where standard blades fail, KINS’ ORANGE ScarfMaster HT is the best-fitting saw blade. Talk to one of our experts to choose the best suitable blade for you.

TCT SAW BLADE FOR CUTTING HIGH TENSILE TUBES WITH WELD BEAD

Due to its robust saw body, the teeth are provided with maximum support. The combination of tooth and body secures stability and fracture resistance. This extends the blade life significantly, even at an extraordinary line speed and increased uptime.

The KINS' ORANGE ScarfMaster HT is your best choice for cutting high-tensile API pipes and tubes with tensile strength higher than 900 N/mm² and heavy cutting ID scarf. For low- to medium-tensile precision tubes with a tensile strength of up to 1000 N/mm² and heavy ID scarf, the KIN'S ORANGE ScarfMaster LMT is recommended.

THE EXTRAORDINARY ADVANTAGES OF KINS’ ORANGE SCARFMASTER HT

Up to 100% or even more blade life compared to KINS’ ORANGE ScarfMaster LMT saw blade
Reduction of scrap rate
Ideal for high alloy
Broad availability of diameter and tooth counts
Increased resistance to abrasive wear
High line speed
Increased uptime
Cuts high tensile API pipes (up to 1,800 N/mm²)

Suitable APPLICATIONS for KINS’ ORANGE SCARFMASTER HT

This TCT saw blade excels as the top pick for cutting high-tensile API tubes with heavy ID scarf, handling tensile strengths from 900 N/mm² on both single and twin flying cut-off applications. With a capacity for cutting speeds ranging from 330 - 420 m/min, it's the perfect choice for a wide array of applications, including driveshafts (automotive), telescoping systems (cranes) and mother tubes for the production of drawn tubes.

Flying cut-off applications dealing with heavy weld bead
Tubes with tensile strength from 900 N/mm²
Cutting speed: 240 - 450 m/min (choose max available)
Tooth load ranging from: 0.03 – 0.05 mm/tooth

Typical steel grades

S355/1020
MnB-alloyed steel
High carbon steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer	Machine type
Fives OTO Mills	TGB161, TGB161, TAC80 (twin), TAC90 (twin)
MTM	A100, A171
Asmag / Seuthe	TSR34, TSR64, TSR95, TSR114
Olimpia80	RCF series
Elmasksan	ELBM series

STANDARD RANGE KINS’ ORANGE SCARFMASTER HT

Diameter (mm)	Kerf (mm)	No. of teeth (Z)
285	3,6 / 3,2	70 / 90
315	3,6 / 3,2	80 / 100
350	3,6 / 3,2	90 / 110
400	3,6 / 3,2	100 / 130
450	3,6 / 3,2	110 / 140
500	3,6 / 3,2	120 / 160
560	3,6 / 3,2	130 / 170
600	3,6 / 3,2	140 / 190
630	3,6 / 3,2	150 / 200
650	3,6 / 3,2	160 / 200

KINS' ORANGE ScarfMaster HT is formerly known as: ScarfMaster NG

Search

KINS' ORANGE ScarfMaster HT

Single and Twin cut-off with weld bead

TCT SAW BLADE FOR CUTTING HIGH TENSILE TUBES WITH WELD BEAD

THE EXTRAORDINARY ADVANTAGES OF KINS’ ORANGE SCARFMASTER HT

Suitable APPLICATIONS for KINS’ ORANGE SCARFMASTER HT

Typical steel grades

Worldwide network

TYPICAL MACHINES

STANDARD RANGE KINS’ ORANGE SCARFMASTER HT

Discover other products

KINS' ORANGE SpeedMaster Performance

KINS' ORANGE SpeedMaster

KINS' ORANGE ScarfMaster LMT

KINS' ORANGE OrbitalMaster Stainless

KINS' ORANGE OrbitalMaster

CONTACT

Kinkelder

SAW BLADE SELLING POINT