Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' BLUE Multi Performance

The heavy-duty sawing solution for high-volume tube cutting

The KINS' BLUE Multi Performance is purpose-built for the most demanding stationary tube cutting applications — multiple tubes cut simultaneously, thick-wall sections (> 4,5 mm), and high-volume production runs that cannot afford downtime. This is the real workhorse of the KINS' BLUE range.

With cutting speeds between 180 - 290 m/min and a tensile strength range from 400 - 1,000 N/mm², the KINS' BLUE Multi Performance is engineered to maximize output and minimize cost per cut — delivering real value where it matters most.

Built for volume. Engineered for efficiency.

Its innovative tooth geometry and saw body design are specifically optimized for improved chip evacuation — even on heavy-wall tubes and multi-tube cuts. Combined with an optimized carbide grade and the latest PVD coating development, it delivers a smooth surface finish at consistently high output rates.

Typical applications include machinery components, excavator parts, wind turbine components, flanges, pipeline parts, and bearings — industries where high-volume, cost-efficient cutting is non-negotiable. It is the natural choice for high-performance machines like Rattunde, Mair, Simec, Soco, RSA, Adige/BLM, Sinico, and Bewo, running at full capacity.

From cost per cut to real value

The KINS' BLUE Multi Performance reaches its full potential when paired with a well-maintained, high-performance machine and the right application setup. To get the most out of this blade, our application engineers are ready to support you.

When conditions are right, the results speak for themselves: minimized downtime, maximized output, and a lower cost per cut across every production run.

Advantages of KINS’ BLUE Multi Performance

Specifically crafted for low- and medium tensile, thick-wall (> 4,5 mm) steel tubes, and multiple tube cutting with tensile strengths between 400-1,000 N/mm²
Innovative tooth geometry and saw body design for improved chip evacuation, especially on heavy wall tubes
New PVD coating (latest development for achieving the best results) for a smooth surface finish
Optimized carbide grade

Applications for KINS’ BLUE Multi Performance

Cutting low- and medium tensile, thick-wall (> 4,5 mm) steel tubes, and multiple steel tubes at once (400 - 1,000 N/mm²) on high-performance stationary sawing machines
Suggested cutting speed: 180 – 290 m/min.
Tooth load: 0.03 – 0.19 mm/tooth

Applications for KINS’ BLUE Multi Performance include:

Excavator parts
Wind turbine components
Flanges
Pipeline parts
Bearings
Scaffolding
Furniture
Automotive tubes
Structurals
Freeform profiles

Typical steel grades

Low carbon steel
Medium carbon steel
High carbon steel
Boron steel

Worldwide network

Find your distributorGet your saw blades

Typical machines

Manufacturer	Machine type
Rattunde	ACS Series
Sinico	TOP Series
Bewo	DCH/SCF Series, Sigma/Omega
RSA	Rasacut Series
Soco	SA Series
Adige/BLM	TS/CM Series

STANDARD RANGE KINS’ BLUE Multi Performance

Diameter (mm)	Kerf (mm)	Bore hole (mm)	Pinhole combination	Number of teeth (Z)
315	2,3/2,0	32	2/8.5/45 4/11/63	110
350	2,7/2,5	32	2/8.5/45 4/11/63	100
350	2,7/2,5	32	2/8.5/45 4/11/63	120
350	2,7/2,5	32	2/8.5/45 4/11/63	140
350	2,7/2,5	50	4/16/80	100
350	2,7/2,5	50	4/16/80	120
350	2,7/2,5	50	4/16/80	140
360	2,6/2,25	40	4/12/64 4/12/90	100
360	2,7/2,5	40	4/12/64 4/12/90	120
360	2,6/2,25	50	4/16/80	100
360	2,7/2,5	50	4/16/80	120
370	2,7/2,5	32	2/8.5/45 2/12/64	110
370	2,7/2,5	32	2/8.5/45 2/12/64	130
370	2,7/2,5	50	4/16/80	110
370	2,7/2,5	50	4/16/80	130