Search

SearchSearch

Need help with an alternative? Contact an expert

Back to overview

KINS' ORANGE ScarfMaster LMT

Single and Twin cut-off with inside scarf

Engineered for tube mills with flying cut-off applications handling the detached heavy weld bead inside the tube, the KINS' ORANGE ScarfMaster LMT saw blade delivers precision and durability. Its distinctive tooth geometry and highly shock-resistant carbide tips ensure excellence in cutting performance

A TCT BLADE FOR cutting with high LINE SPEED and inside scarf

The robust saw body provides maximum support to the teeth, ensuring a stable and fracture-resistant combination. This extends the blade life significantly, even under extraordinary line speeds, contributing to increased uptime.

Choose the KINS' ORANGE ScarfMaster LMT for cutting low- to medium-tensile precision tubes with a tensile strength of up to 1,000 N/mm² and heavy ID scarf. For cutting high-tensile precision tubes with a tensile strength higher than 900 N/mm² and heavy ID scarf, the KIN'S ORANGE ScarfMaster HT is recommended.

Our application engineers are trained to advise you on the best saw blade for your production mix and can support you during trials at your production site when needed.

Advantages of KINS’ ORANGE ScarfMaster LMT

High line speed
Increased uptime
Extended blade life
Cuts all sizes of scarf
Cuts high tensile precision API Pipes (up to 1,000 N/mm²)

Suitable APPLICATIONS for KINS’ ORANGE SCARFMASTER LMT

This TCT saw blade is the premier choice for cutting high-tensile precision tubes with a heavy ID scarf, managing tensile strengths up to 1,800 N/mm². With the capability for cutting speeds ranging from 260 - 450 m/min, it is the ideal selection for diverse applications such as automotive tubes, structural and mechanical, mine bolts, freeform profiles, oil and gas, and heat exchangers.

Flying cut-off applications dealing with heavy ID scarf
Low and medium tensile strength up to 1,000N/mm²
Cutting speed: 260 - 450 m/min
Tooth load ranging from: 0.03 – 0.05 mm/tooth

TYPICAL STEEL GRADES FOR KINS’ ORANGES SCARFMASTER LMT

Low carbon steel
Medium carbon steel
High carbon steel
Boron steel
Low-alloy high-strength steel

Worldwide network

Find your distributorGet your saw blades

TYPICAL MACHINES

Manufacturer	Machine type
Fives OTO Mills	TGB161, TGB161, TAC80 (twin), TAC90 (twin)
MTM	A100, A171
Asmag / Seuthe	TSR34, TSR64, TSR95, TSR114
Olimpia80	RCF series
Elmasksan	ELBM series

STANDARD RANGE KINS’ ORANGE SCARFMASTER LMT

Diameter (mm)	Kerf (mm)	No. of teeth (Z)
285	3,6 / 3,2	70 / 90
315	3,6 / 3,2	80 / 100
350	3,6 / 3,2	90 / 110
400	3,6 / 3,2	100 / 130
450	3,6 / 3,2	110 / 140
500	3,6 / 3,2	120 / 160
560	3,6 / 3,2	130 / 170
600	3,6 / 3,2	140 / 190
630	3,6 / 3,2	150 / 200
650	3,6 / 3,2	160 / 200